ZPT+ Publikationen
Fachzeitschriften (refereed)
Fachzeitschriften (refereed) | Autoren | Titel | Publ. |
Open Access Library Journal, 2015, 2 | S.Zamiri, B.Reitinger, M.-A.Rodríguez-Rivera, G.Ramos-Ortíz, P.Burgholzer, S.Bauer, J.-L.Maldonado | Employing 532 nm Wavelength in a Laser Ultrasound Interferometer Based on Photorefractive Polymer Composites | Jan. 2015 |
Measurement Science and Technology, 2015, 26 | D.Markl, G.Hannesschläger, S.Sacher, M.Leitner, J.G.Khinast, A.Buchsbaum | Automated pharmaceutical tablet coating layer evaluation of optical coherence tomography images | Feb. 2015 |
Nondestructive Testing and Evaluation | Irina Hinterlechner, Pere Barriobero-Vila, Bernhard Reitinger, Thomas Fromherz, Guillermo Requena & Peter Burgholzer | In-situ monitoring of α → β phase phase transformation in Ti-6Al-6V-2Sn using laser ultrasonics | Aug. 2017 |
Bioengineering, Special Issue Biomedical Photoacoustic and Photothermal Sensing and Imaging (2018), 5 | Peter Burgholzer, Gregor Stockner, Günther Mayr | Acoustic Reconstruction for Photothermal Imaging | Aug. 2018 |
Inverse Problems | Oliver Lang, Peter Kovacs, Christian Motz, Mario Huemer, Thomas Berer, Peter Burgholzer | A Linear State Space Model for Photoacoustic Imaging in an Acoustic Attenuating Media | Accepted |
Microscopy & Analysis | Sascha Senck, Christian Gusenbauer, Bernhard Plank, Dietmar Salaberger, Johann Kastner | Three-dimensional characterization of polymeric materials using a Talbot-Lau grating interferometer CT | Jan. 2015 |
Case Studies in Nondestructive Testing and Evaluation | Christian Hannesschläger, Bernhard Plank, Dietmar Salaberger, Johann Kastner | Fibre structure characterisation of injection moulded short fibre-reinforced polymers by X-ray scatter dark field tomography | Apr. 2015 |
Materials 2015, 8, 3831-3853 | Johann Charwat-Pessler, Maurizio Musso, Alexander Petutschnigg, Karl Entacher, Bernhard Plank, Erik Wernersson, Stefan Tangl and Peter Schuller-Götzburg | A Bone Sample Containing a Bone Graft Substitute Analyzed by Correlating Density Information Obtained by X-ray Micro Tomography with Compositional Information Obtained by Raman Microscopy | Jun. 2015 |
Steel Research, Volume 87, Issue 3, pp. 386–393 (March 2016) | Christian Gusenbauer, Michael Reiter, Johann Kastner, Gerald Kloesch | Detection of Non-Metallic Inclusions in Quenched and Tempered Steel Bars by XCT and After Fatigue Life Testing | Mar. 2016 |
Case Studies in Nondestructive Testing and Evaluation, Volume 6, Part B, November 2016, Pages 30-38 |
Christian Gusenbauer, Elisabeth Leiss-Holzinger, Sascha Senck, Katrin Mathmann, Johann Kastner, Stefan Hunger, Wolfgang Birkfellner |
Characterization of medical and biological samples with a Talbot-Lau grating interferometer µXCT in comparison to reference methods | Apr. 2016 |
NDT & E International, 86, 65-72,2017, Elsevier | F.Prade, F.Schaff, S.Senck, P.Meyer, J.Mohr, J.Kastner, F.Pfeiffer | Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vector radiography | Nov.2016 |
Case Studies in Nondestructive Testing and Evaluation 6 (2016) 39–46 | J.Weissenböck, A.Bhattacharya, B.Plank, C.Heinzl, J.Kastner | Visual classification of braided and woven fiber bundles in X-ray computed tomography scanned carbon fiber reinforced polymer specimens | Jun. 2016 |
IEEE Transactions on Visualization and Computer Graphics | Arindam Bhattacharya, Johannes Weissenböck, Rephael Wenger, Artem Amirkhanov, Johann Kastner, Christoph Heinzl | Interactive Exploration and Visualization using MetaTracts extracted from Carbon Fiber Reinforced Composites | Jun. 2016 |
Journal of Nondestructive Evaluation Ref. No.: JONE-D-18-00075 | Christian Gusenbauer, Michael Reiter, Bernhard Plank, Dietmar Salaberger, Sascha Senck, Johann Kastner | Porosity determination of carbon and glass fibre reinforced polymers using phase-contrast imaging | in print |
Journal of Microscopy | Z.Asghar, G.Requena, F.Sket | Multiscale tomographic analysis of heterogeneous cast Al-Si-X alloys |
Mar. 2015 |
Journal of Alloys and Compounds; Volume 626, 25 March 2015, Pages 330-339 | Pere Barriobero-Vila, Guillermo Requena, Thomas Buslaps, Matthias Alfeld, Ulrike Boesenberg | Role of element partitioning on the α-β Phase transformation kinetics of a bi-modal Ti-6Al-6V-2Sn alloy during continuous heating | Mar. 2015 |
Journal of Materials Science; Volume 50, Issue 3, 2015, Pages 1412-1426 | Pere Barriobero-Vila, Guillermo Requena, Fernando Warchomicka, Andreas Stark, Norbert Schell, Thomas Buslaps | Phase transformation kinetics during continuous heating of a β-quenched Ti–10V–2Fe–3Al alloy | Mar. 2015 |
Journal of Synchrotron Radiation; Volume 23, Issue 2, 1 March 2016, Pages 579-589 | M.Alfeld, M.Wahabzada, C.Bauckhage, K.Kersting, G.Wellenreuther, P.Barriobero-Vila, G.Requena, U.Boesenberg, G.Falkenberg | Non-negative matrix factorization for the near real-time interpretation of absorption effects in elemental distribution images acquired by X-ray fluorescence imaging | Mar. 2016 |
Materials Science and Engineering; Volume 657, March 07, 2016, Pages 244-258 | David Canelo-Yubero, Guillermo Requena, Federico Sket, Cecilia Poletti, Fernando Warchomicka, John Daniels, Norbert Schell, Andreas Stark | Load partition and microstructural evolution during in situ hot deformation of Ti-6Al-6V-2Sn alloys | Mar. 2016 |
Acta Materialia; Volume 95, 4 June 2015, Pages 90-101 | Pere Barriobero-Vila, Guillermo Requena, Sabine Schwarz, Fernando Warchomicka, Thomas Buslaps | Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy | Jun. 2015 |
Materials (Basel). 2017 Mar; 10(3): 268. | Pere Barriobero-Vila, Joachim Gussone, Jan Haubrich, Stefanie Sandlöbes, Julio Cesar Da Silva, Peter Cloetens, Norbert Schell, Guillermo Requena | Inducing Stable a + ß Microstructures during Selective Laser Melting of Ti-6Al-4V Using Intensified Intrinsic Heat Treatments | Mar.2017 |
Acta Materialia; Volume 135, 15 August 2017, Pages 132-143 | P. Barriobero-Vila, Verona Biancardi, Sabine Schwarz, Thomas Buslaps Guillermo Requena | Tracking the a" martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloy | Jun.2017 |
Acta Materialia; Volume 129, 1 May 2017, Pages 52-60 | Philipp Kürnsteiner, Marcus Benjamin Wilms, Andreas Weisheit, Pere Barriobero Vila, Eric A. Jägle, Dierk Raabe | Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition | May.2017 |
Microsc. Microanal. 23 (Suppl 1), 2017 | Philipp Kürnsteiner, Markus Benjamin Wilms, Andreas Weisheit, Pere Barriobero-Vila, Baptiste Gault, Eric Aimé Jägle, Dierk Raabe | In-process Precipitation During Laser Additive Manufacturing Investigated by Atom Probe Tomography | Jun.2017 |
Nondestructive Testing and Evaluation, 2017, https://doi.org/10.1080/10589759.2017.1356925 | I. Hinterlecner, P. Barriobero-Vila, B. Reitinger, T. Fromhertz, G. Requena, P. Burgholzer | In-situ monitoring of alpha-beta phase transformation in Ti-6Al-6V-2Sn using laser ultrasonics | Jul. 2017 |
Materials Science and Engineering A 709 (2018), 193-202. | Katrin Bugelnig, Federico Sket, Holger Germann, Thomas Steffens, Robert Koos, Fabian Wilde, Elodie Boller, Guillermo Requena | Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy | Jan. 2018 |
Practical Metallography (accepted manuscript) | Bugelnig K., Sket F., Germann H., Steffens T., Plank B.,Wilde F., Boller E., Requena G. | Optimierte Segmentierung der 3D Mikrostruktur in gegossenen Al-Si Kolbenlegierungen | accepted |
Materials Science and Engineering A 717 (2018), 134-143. | Pere Barriobero-Vilaa, Joachim Gussone, Klemens Kelm, Jan Haubrich, Andreas Stark,Norbert Schell, Guillermo Requena | An in situ investigation of the deformation mechanisms in a β-quenched Ti-5Al-5V-5Mo-3Cr alloy | Jan. 2018 |
Practical Metallography 55(8) (2018), 556-568. | Bugelnig K., Barriobero-Vila P., Requena G. | Synchrotron Computer Tomography as a Characterization Method for Engineering Materials | Jul. 2018 |
Materials 11(8) (2018), 1300. https://doi.org/10.3390/ma11081300 (registering DOI) | Katrin Bugelnig, Holger Germann, Thomas Steffens, Federico Sket, Jermoe Adrien, Eric Maire, Elodie Boller, Guillermo Requena | Revealing the Effect of Local Connectivity of Rigid Phases during Deformation at High Temperature of Cast AlSi12Cu4Ni(2,3)Mg Alloys | Aug. 2018 |
Konferenzbeiträge
Konferenzen | Autoren | Titel | Datum |
DACH Jahrestagung 2015, Salzburg, Austria | T.Windisch, B.Köhler | Anwendungsbeispiele und Abblidungsgrenzen der kontaktlosen Ultraschallprüfung mit breitbandigen Signalen bis 20 MHz | May 2015 |
WCNDT2016 - 19th World Conference on Non-Destructive Testing, Munich, Germany | T. Windisch | Defect detection with non-contact ultrasound under a practical point of view | June 2016 |
QNDE 2018 - 4th Annual Review of Progress in Quantitative Nondestructive Evaluation, Provo, Utah, USA | B. Köhler, M. Barth, M. Reiter, P. Krüger | Annular Phased Array Probe for Testing of Aero Engine Discs cold work at surface treated aero engine materials | July 2017 |
ECNDT 2018 - 12th European Conference on Non-Destructive Testing, Gothenburg, Sweden | B. Köhler, J. Kissing, S. Gartsev, M. Barth, M. Rjelka, J. Bamberg, and R. Hessert | New measurement approach for determination of residual stress and cold work at surface treated aero engine materials | June 2018 |
ECNDT 2018 - 12th European Conference on Non-Destructive Testing, Gothenburg, Sweden | S. Gartsev, M. Rjelka, M. Barth, and B. Koehler | Nonlinear elastic behaviour of aero-engine materials for microstructure and stress state characterization | June 2018 |
QNDE 2018 - 45th Annual Review of Progress in Quantitative Nondestructive Evaluation, Burlington, VT, USA | B. Köhler, M. Barth, M. Reiter, P. Krüger | Investigation of white etching cracks in roller bearings by scanning acoustic microscopy | July 2018 |
IRMMW-THz 2014 - 39th International Conference on Infrared, Millimeter and Terahertz Waves, Tucson, Arizona, 2014, 1-2 | M.Pfleger, H.Pühringer, S.Katletz | Terahertz-Elasticity Measurements on Elastomers | Sep. 2014 |
WCNDT2016 - 19th World Conference on Non-Destructive Testing, Munich, Germany | Robert Seyrkammer, Saeid Zamiri, Bernhard Reitinger, Roland Galos, Christian Hofer, Peter Burgholzer | Laser Ultrasound investigations on composites with optical generation from visible infrared | June 2016 |
ECBO 2017 - European Conferences on Biomedical Optics, Munich, Germany | P.Burgholzer, M.Haltmeier, T.Berer, E.Leiss-Holzinger, T.W.Murray | Super-resolution photoacoustic microscopy using joint sparsity | June 2017 |
SPIE BiOS 2017 - SPIE Photonics West, San Francisco, California, United States | P.Burgholzer, T.W.Murray, M.Haltmeier, E.Leiss-Holzinger, T.Berer | Photoacoustic super-resolution microscopy using blind structured speckle illumination | Feb. 2017 |
ECNDT 2014 - 11th European Conference on Non-Destructive Testing, Prague, Czech Republic | Bernhard Plank, Guenther Mayr, Andreas Reh, Denis Kiefel, Rainer Stoessel, Johann Kastner | Evaluation and Visualisation of Shape Factors in Dependence of the Void Content within CFRP by Means of X-ray Computed Tomography | Okt. 2014 |
ECNDT 2014 - 11th European Conference on Non-Destructive Testing, Prague, Czech Republic | J.Kastner, S.Zaunschirm, G.Requena, S.Baumgartner, H.Pinto | 3D-microstructure characterization of thermomecanically treated Mg-alloys by high resolution X-ray computed tomography | Okt. 2014 |
ECNDT 2014 - 11th European Conference on Non-Destructive Testing, Prague, Czech Republic | D.Salaberger, J.Kastner, M.Arikan, T.Paier | Characterization of damage mechanisms in glass fibre reinforced polymers using X-ray computed tomography | Okt. 2014 |
ECNDT 2014 - 11th European Conference on Non-Destructive Testing, Prague, Czech Republic | C.Gusenbauer, M.Reiter, J.Kastner, G.Klösch | Detection of non-metallic inclusions in steel by X-ray computed tomography and after fatigue testing | Okt. 2014 |
ECNDT 2014 - 11th European Conference on Non-Destructive Testing, Prague, Czech Republic | C.Kuhn, M.Reiter, S.Schröpfer, S.Kasperl, D.Weiss, M.Erler | CT-Wizard - Automatic determination of optimal CT measuring parameters for an unknown part | Okt. 2014 |
7. Landshuter Leichtbau-Colloquium 2015, Landhut, Germany | J.Kastner, B.Plank, D.Salaberger | Anwendung der Röntgen-Computertomografie zur zerstö-rungsfreien Charakterisierung von Leichtbauwerkstoffen und -bauteilen | Feb. 2015 |
Skyscan User Meeting 2015, Bruges, Belgium | Sascha Senck, Christian Gusenbauer, Bernhard Plank, Dietmar Salaberger, Johann Kastner | Three-dimensional characterization of polymeric materials using a Talbot-Lau grating interferometer CT | May. 2015 |
DACH Jahrestagung 2015, Salzburg, Austria | C.Gusenbauer, S.Großeiber, B.Harrer, B.Plank, G.Klösch, W.Schützenhöfer, S.Ilie, G.Requena, J.Kastner | Einsatzmöglichkeiten von CT in der Stahlforschung | May. 2015 |
DACH Jahrestagung 2015, Salzburg, Austria | J. Kastner, S.Senk, C.Gussenbauer, B.Plank, V.Revol, A.Sasov | Talbot-Lau Gitter-Interferometer-Computertomografie für die Charakterisierung von faserverstärkten Kunststoffen | May 2015 |
ICEF12 - 12th International Congress on Engineering and Food | K.Mathmann, J.Kastner, C.Heinzl | Multimodal image analysis for the characterization of complex wheat-dough microstructures | Jun. 2015 |
DIR 2015 - International Symposium on Digital Industrial Radiology and Computed Tomography | C.Affenzeller, C.Gusenbauer, M.Reiter, J.Kastner | Measurement uncertainty evaluation of an X-ray computed tomography system | Jun. 2015 |
DIR 2015 - International Symposium on Digital Industrial Radiology and Computed Tomography | J.Kastner, B.Plank and C.Heinzl | Advanced X-ray computed tomography methods: High resolution CT, phase contrast CT, quantitative CT and 4DCT | Jun. 2015 |
DIR 2015 - International Symposium on Digital Industrial Radiology and Computed Tomography | H.Zauner, J.Kastner, C.Heinzl | Multimodal Registration and Fusion of Industrial CT Data | Jun. 2015 |
DIR 2015 - International Symposium on Digital Industrial Radiology and Computed Tomography | J.Kastner, S.Senk, V.Revol, A.Sasov | Talbot-Lau grating interferometer X-ray computed tomography for the characterization of fibre-reinforced polymers | Jun. 2015 |
DGM - 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, Vienna, Austria | Dietmar Salaberger, Michael Jerabek, Thomas Koch, Johann Kastner | Consideration of accuracy of quantitative X-ray CT analyses for short-glass-fibre-reinforced polymers | Jul. 2015 |
DGM - 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, Vienna, Austria | Bernhard Plank, Christian Hannesschläger, Vincent Revol, Johann Kastner | Characterisation of anisotropic fibre orientation in composites by means of X-ray grating interferometry computed tomography | Jul. 2015 |
GE's 11th X-ray Forum, Cologne, Germany | B.Plank, D.Salaberger, S.Zaunschirm , J.Kastner | Quantitative high resolution CT charaterization of composites and the influence of temperature stability | Jul. 2015 |
14th ICSIA - 14th International Congress for Stereology and Image Analysis, Liege, Belgium | H.Zauner, J.Kastner, D.Salaberger, C.Heinzl | 3D image processing for single fibre characterization by means of XCT | Jul. 2015 |
ICCM20 - 20th International Conference on Composite Materials, Copenhagen, Denmark | D.Salaberger, P.J.Hine, M.Jerabek, J.Kastner | Assessment of accuracy of fibre orientation measurement using X-ray Computed Tomography | Jul. 2015 |
PPS 2015 - Polymer Processing Society Conference, Graz, Austria | D.Salaberger, B.Plank, P.J.Hine, M.Jerabek, T.Koch, J.Kastner | About the use of X-ray tomography for the characterization of fibre reinforced polymers | Sep. 2015 |
iCT2016 - 6th Conference on Industrial Computed Tomography (iCT2016) | M. Reiter, M. Erler, C. Kuhn, C. Gusenbauer, J. Kastner | SimCT: a simulation tool for X-ray imaging | Feb. 2016 |
iCT2016 - 6th Conference on Industrial Computed Tomography (iCT2016) | Guruprasad Rao, Bernhard Plank, Johann Kastner | Comparision of different segmentation methods for porosity evaluation in CFRP-reference samples and comparison with real porosity samples | Feb. 2016 |
iCT2016 - 6th Conference on Industrial Computed Tomography (iCT2016) | G. Gsellmann, M. Jerabek, D. Salaberger | Comparison of predicted and measured fiber orientations in injection molded parts | Feb. 2016 |
Skyscan User Meeting 2016, Luxembourg | G. Rao, C. Gusenbauer, S. Senck, J. Kastner | Three dimensional visualisation of barley corn seed and fish tissue using Talbot Lau grating interferometer | May 2016 |
WCNDT2016 - 19th World Conference on Non-Destructive Testing, Munich, Germany | Christian Gusenbauer, Michael Reiter, Dietmar Salaberger, Johann Kastner | Comparison of Metal Artefact Reduction Algorithms from Medicine Applied to Industrial XCT Applications | Jun. 2016 |
WCNDT2016 - 19th World Conference on Non-Destructive Testing, Munich, Germany | B. Plank, R. Helmus, M. Gschwandtner, R. Hinterhölzl, J. Kastner | In-Situ Observation of Bubble Formation in Neat Resin during the Curing Process by Means of X-Ray Computed Tomography | Jun. 2016 |
WCNDT2016 - 19th World Conference on Non-Destructive Testing, Munich, Germany | J. Kastner, B. Plank, G. Rao | Evaluation of a Testpiece for Porosity in Carbon Fibre Reinforced Polymers | Jun. 2016 |
WCNDT2016 - 19th World Conference on Non-Destructive Testing, Munich, Germany | S. Senck, D. Salaberger, C. Gusenbauer, B. Plank, G. Rao, J. Kastner | Talbot-Lau grating interferometer XCT for the quantitative characterization of damage in polymers after impact and static tensile testing | Jun. 2016 |
ECCM 2017 - European Conference on Composite Materials, Munich, Germany | G. Rao, B. Plank, C. Heinzl, J. Kastner | Quantitative evaluation of induced porosity reference samples implemented by drill hole in CFRP using XCT and various segmentation parameters | Jun. 2016 |
ECCM 2017 - European Conference on Composite Materials, Munich, Germany | J. Kastner, S. Senck, B. Plank, D. Salaberger, G. Rao, C. Gusenbauer | Three-dimensional characterization of structure and damage of polymers using Talbot-Lau grating interferometer µ-XCT | Jun. 2016 |
ECCM 2017 - European Conference on Composite Materials, Munich, Germany | Claudia Pretschuh, Lukas Sobczak, Dietmar Salaberger, Michael Jerabek, Thomas Lummerstorfer | Impact Performance in PP with PVA Fiber Reinforcement | Jun. 2016 |
ECCM 2017 - European Conference on Composite Materials, Munich, Germany | D. Salaberger, M. Jerabek, C. Hannesschläger, J. Kastner | Single fibre characterisation of curved fibres within thermoplastic matrix using X-ray tomography | Jun. 2016 |
4th international conference on image formation in X-ray computed tomography 2016 | M. Reiter, J. Kastner | Investigation towards simulation-based determination of measurement uncertainties for X-ray computed tomography | Jul. 2016 |
4th international conference on image formation in X-ray computed tomography 2016 | C. Gusenbauer, S. Hunger, S. Senck and J. Kastner | Characterization of Tooth Samples with a Talbot-Lau Grating Interferometer μXCT Desktop Device | Jul. 2016 |
EuroVis 2016 - 18th EG/VGTC Conference on Visualization | Bernhard Fröhler, Torsten Möller, Christoph Heinzl | GEMSe: Visualization-Guided Exploration of Multi-channel Segmentation Algorithms |
Okt. 2016 |
Tool 2016 - 10th Tool Conference, Bratislava, Slovakia | Wolfgang Schuetzenhoefer, Christina Decker, Bernhard Plank, Ernst Plesiutschnig | Evaluation of Alternative Microcleanliness Methods | Okt. 2016 |
iCT 2017 - 7th Conference on Industrial Computed Tomography, Leuven, Belgium | M.Reiter, C.Gusenbauer, J.Kastner, G.Schmee | Distance measurements on inaccessible wires in plastic parts with X-ray computed tomography | Feb. 2017 |
iCT 2017 - 7th Conference on Industrial Computed Tomography, Leuven, Belgium | B. Fröhler, C. Heinzl, J. Kastner, T. Möller | Parameter-Space Exploration for Computed Tomography Image Analysis Algorithms | Feb. 2017 |
iCT 2017 - 7th Conference on Industrial Computed Tomography, Leuven, Belgium | C. Gusenbauer, M. Reiter, B. Plank, S. Senck, C. Hannesschläger, S. Renner, R. Kaufmann, J. Kastner | Multi-modal Talbot-Lau grating interferometer XCT data for the characterization of carbon fibre reinforced polymers with metal components | Feb. 2017 |
iCT 2017 - 7th Conference on Industrial Computed Tomography, Leuven, Belgium | Guruprasad Rao, Alexander Amirkhanov, Dietmar Salaberger, Christoph Heinzl, Johann Kastner | Damage characterization in SFRP using X-ray computed tomography after application of incremental and interrupted in situ quasi static tensile loading | Feb. 2017 |
DGZfP-Jahrestagung 2017 - Zerstörungsfreie Materialprüfung, Koblenz, Germany | Bernhard Plank, Dietmar Salaberger, Guruprasad Rao, Alexander Amirkhanov, Johann Kastner | 4D Röntgen-Computertomographie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen | May 2017 |
iCTMS 2017 - 3rd International Conference on Tomography of Materials and Structures, Lund, Sweden | C. Gusenbauer, M. Reiter, B. Plank, G. Mayr, J. Gruber, S. Rauchenzauner, E. Leiss-Holzinger, B. Reitinger, P. Burgholzer, M. Barth, B. Köhler, J. Kastner | Talbot-Lau grating interferometer XCT for porosity determination in CFRP with metal components in comparison to other NDT inspection methods | June 2017 |
ICCM21 - 21th International Conference on Composite Materials, Xian, China | M. Jerabek, A. Amirkhanov, D. Salaberger, J. Kastner | Microstructure dependent damage mechanisms in 3D using X-ray tomography | Aug. 2017 |
IFM 2017 - 20th International Forgemasters Meeting, Graz, Austria | Wolfgang Schuetzenhoefer, Christina Decker, Bernhard Plank, Ernst Plesiutschnig | Alternative Methods for Determining Microcleanliness: A Study Based on Hot Work Tool Steels | Sep. 2017 |
XNPIG - X-ray and Neutron Phase Imaging with Gratings, Zurich, Switzerland | J. Kastner, S. Senck, B. Plank, C. Gusenbauer, C. Heinzl | Challenges for grating interferometer X-ray computed tomography for applications in materials science | Sep. 2017 |
APCNDT - Asia Pacific Conference for Non-Destructive Testing, Singapore | Johann Kastner, Christian Gusenbauer, Sascha Senck | Talbot-Lau grating interferometer µXCT for quantitative characterization of polymeric structures by using phase and dark field contrast | Nov. 2017 |
APCNDT - Asia Pacific Conference for Non-Destructive Testing, Singapore | Johann Kastner, Dietmar Salaberger, Christoph Heinzl, Christian Gusenbauer, Guruprasad Rao | High resolution X-ray computed tomography for non-destructive characterization and in-situ investigations | Nov. 2017 |
iCT 2018 - 8th Conference on Industrial Computed Tomography, Wels, Austria | Christian Hannesschläger, Stefanie Rauchenzauner,Christian Gusenbauer, Dietmar Salaberger, Johann Kastner | In-situ Damage Comparison between Fabric-Fabric And Fabric-UD bonded CFRP | Feb. 2018 |
iCT 2018 - 8th Conference on Industrial Computed Tomography, Wels, Austria | C. Gusenbauer, M. Reiter, D. Salaberger, J. Kastner | Simulation-based optimization of nano-XCT scans for high-resolution applications | Feb. 2018 |
ECNDT 2018 - 12th European Conference on Non-Destructive Testing, Gothenburg, Sweden | B. Plank, C. Gusenbauer, S. Senck, H. Hoeller, J. Kastner | Porosity Determination in CFRP by means of X-ray Computed Tomography Methods | Jun. 2018 |
ECNDT 2018 - 12th European Conference on Non-Destructive Testing, Gothenburg, Sweden | C. Gusenbauer, M. Reiter, D. Salaberger, B. Plank, J. Kastner | High-resolution X-ray computed tomography of inhomogeneous materials | Jun. 2018 |
ECNDT 2018 - 12th European Conference on Non-Destructive Testing, Gothenburg, Sweden | Johann Kastner, Christian Gusenbauer, Bernhard Plank, Jonathan Glinz, Sascha Senck | Challenges for grating interferometer X-ray computed tomography for practical applications in industry | Jun. 2018 |
ECNDT 2018 - 12th European Conference on Non-Destructive Testing, Gothenburg, Sweden | D. Salaberger, S. Gerner, S. Kahlen, J. Kastner | Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography | Jun. 2018 |
ECCM18 - Proceedings 7th European Conference on Composite Materials, Athens, Greece | D. Salaberger, T. Lummerstorfer, M. Jerabek, J. Kastner | Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography | Jun. 2018 |
ECCM18 - Proceedings 7th European Conference on Composite Materials, Athens, Greece | C. Hannesschläger , F. Röper , M. Wolfahrt , G. Kucher , B. Plank and J. Kastner | In-situ damage investigation of adhesively bonded composite repairs | Jun. 2018 |
DGM - 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, Vienna, Austria | M.Palmstingl, T.Koch, D.Salaberger, T.Paier | Morphological impact on the fatigue behaviour of short fibre reinforced polypropylene | Jul. 2016 |
iCT 2016 - 6th Conference on Industrial Computed Tomography in Wels / Austria | Katrin Bugelnig, Frederico Sket, Holger Germann, Thomas Steffens, Fabian Wilde, E. Boller, Guillermo Requena | 3D microstructure and damage accumulation in a cast AlSi12Cu5Ni2piston alloy as a function of solution treatment | Feb. 2016 |
Dissertationen
Titel | Abgeschlossen | PhD-Student |
Laser-Akustische Messtechnik in der Materialcharakterisierung - Numerische Schallfeldberechnung und praxisgerechte Auslegung für die kontaktlose Volumenprüfung | Feb. 2016 | Thomas Windisch |
In situ determination of phase transformation in near-beta and alpha-beta Ti alloys | Jul. 2015 | Pere Barriobero Vila |
Temperatur- Verformungs –Zeitabhängigkeit der Gefügeentwicklungen in Stahlbrammen im 2.Duktilitätsminimum | Dez. 2017 | Simon Grosseiber |
3-dimensionale Beschreibung der Morphologie und des Deformations- und Schädigungsverhaltens heterophasischer Polymerwerkstoffe | Martin Palmstingl | |
Correlation between 3D microstructure and thermomechanical behavior of Al-Si piston Alloys | Katrin Bugelnig | |
Analysis of crack nucleation and coalescence during low strain rate testing of micro alloyed steel | Harald Radlwimmer | |
Damage mechanisms at the 2nd minimum of ductility of micro alloyed steel | Pierre Wiehoff | |
3D Characterization of ZK60 Mg alloys (working title) | Stefan Zaunschirm | |
3D-Charakterisierung von mehrphasigen Polymerwerkstoffen und Evaluierung kritischer Defekte (working title) | Dietmar Salaberger | |
Multi-Modal Visualization of Industrial Computed Tomography Data in the Nanometre Scale (working title) | Bernhard Fröhler |