| 1 | Weissenböck J. (FHW), FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers, iCT2014 – 5th Conference on Industrial Computed Tomography, Wels, Austria, February 25th-28th 2014 |
| 2 | Reh A., Plank B., Kastner J., Gröller E., Heinzl C. (FHW), Advanced Visualization Methods for Porosity in Carbon Fiber Reinforced Polymers, 1rst International Conference on Tomography of Materials and Structures (ICTMS 2013), Ghent, Belgium, July 1st-5th 2013 |
| 3 | Reh A., Gusenbauer C., Kastner J., Gröller E., Heinzl C. (FHW), MObjects - A Novel Method for the Visualization and Interactive Exploration of Defects in Industrial XCT Data, IEEE Visualisation and Computer Graphocs Conference, Atlanta, Georgia, USA, October 13th-18th 2014 |
| 4 | Weissenböck J., Amirkhanov Ar., Li W., Reh A., Amirkhanov Al., Kastner J., Gröller E., Heinzl C. (FHW), FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers, IEEE Pacific Visualization Symposium (PacificVis) 2014, Yokohama, Japan, March 4th-7th 2014 |
| 5 | Straumit I., Lomov S., Verpoest I., Wevers M. (KUL), Determination of local fibers orientation in composite material from micro-CT data, TexComp-11 conference, Leuven, Belgium, September 16th-20th 2013 |
| 6 | Straumit I., Lomov S., Bensadoun F., Wevers M. (KUL), Automatic transformation of 3D micro-CT images into finite element models with anisotropic local properties, 16th European Conference on Composite Materials (ECCM16), Seville, Spain, June 22nd-26th 2014 |
| 7 | Straumit I., Lomov S., Wevers M. (KUL), Influence of the orientation of fibrous structures in a composite material relative to the sample’s rotation axis on the local apparent degree of anisotropy derived from micro-CT, Bruker Micro-CT User meeting, Ostend, Belgium, May 5th-8th 2014 |
| 8 | Kiefel D., Stoessel R., et.all (AIRBUS GROUP), Porosity evaluation in CFRP using CT, Quantitative Non-Destructive Evaluation Conference (QNDE), Boise, USA, July 20th-25th 2014 |
| 9 | Kiefel D., Stoessel R. (AIRBUS GROUP) Plank B., Heinzl C., Kastner J. (FHW), CFRP porosity characterization using μ-Computed Tomography with optimized test parameters supported by XCT-simulation, iCT2014 - 5th Conference on Industrial Computed Tomography 2014, Wels, Austria, February 25th-28th 2014 |
| 10 | Prucha P. (LAC), Progress in NDT techniques for small aircrafts, Polymer composities 2014, University of West Bohemia, Pilsen, Czech Republic, May 2014 |
| 11 | Ducros N., Rebuffel V. (CEA) , Bliznakova K., Dermitzakis A., Kamarianaki Z. (UPAT), Hassler U., Osman A., Tigkos K. (FHG), Simulation study for optimization of X-ray inspection setup applied to CFRP aerostructrures, iCT2014 – 5th Conference on Industrial Computed Tomography, Wels, Austria, February 25th-28th 2014 |
| 12 | Tigkos K., Hassler U., Holub W., Woerlein N., Rehak M. (FHG), Regularisation approach for tomosynthesis x-ray inspection, 40th Annual Review of Progress in Quantitative Nondestructive Evaluation Conference, Baltimore, Maryland, USA, July 21st-26th 2014 |
| 13 | Weissenböck J., Reh A., Salaberger D., Heinzl C., Kastner J. (FHW), Advanced Visualization and Exploration Techniques for Fiber Reinforced Polymers, 11th European Conference on Non-Destructive Testing (ECNDT), Prague, Czech Republic, October 6th-10th 2014 |
| 14 | C. Heinzl, J. Weissenböck, J. Kastner. (FHW),T. Dierig, T. Günther. (VG), D. Kiefel, R. Stössel. (EADS), Software tools for robust extraction, analysis and visualization of porosities in XCT scans of fiber-reinforced polymers, 6th Symposium for Non-Destructive Testing (NDT) in Aerospace, Madrid, Spain, November 12th-14th 2014 |
| 15 | Stamopoulos A., Tserpes K.,UPAT (LTSM), Vavrik D. (CTU), Prucha P. (LAC), Characterization of Porous CFRP laminates by Mechanical Testing and X-Ray Computed Tomography, 6th Symposium for Non-Destructive Testing (NDT) in Aerospace, Madrid, Spain, November 12th-14th 2014 |
