ZPT Publikationen
Fachzeitschriften (reviewed)
Fachzeitschrift | Autoren | Titel | Veröffentl. |
European Journal of Pharmaceutical Sciences, Vol.44, pp.142-148 | D.M.Koller, G.Hannesschläger, M.Leitner, J.G.Khinast | Non-Destructive Analysis of Tablet Coatings with Optical Coherence Tomography | Jul.2011 |
Journal of Biophotonics, Volume 5, Issue 7, pages 508–517 | A. Hochreiner, T. Berer, H. Grün, M. Leitner, P. Burgholzer | Photoacoustic imaging using an adaptive interferometer with a photorefractive crystal | Jul.2012 |
Optics and Lasers in Engineering, Volume 50, Issue 10, Pages 1372–1376 | A.Nemeth, R.Gahleitner, G.Hannesschläger, G.Pfandler, M.Leitner | Ambiguity-free spectral-domain optical coherence tomography for determining the layer thicknesses in fluttering foils in real time | Oct.2012 |
Opt. Express, 2012, vol. 20, no. 21, pp. 23025–23035 | Katletz S.; Pfleger M.; Pühringer ; H.; Mikulics M.; Vieweg N.; Scheller M.; Koch M.; Wiesauer K. | Polarization sensitive terahertz imaging: detection of birefringence and optical axis | Oct.2012 |
Applied Physics Letters, 2013, 102 | Grünsteidl, C.; Veres, I. A.; Roither, J.; Burgholzer, P.; Murray, T. W. & Berer, T. | Spatial and temporal frequency domain laser-ultrasound applied in the direct measurement of dispersion relations of SAWs | Jan.2013 |
InTech, 2013, 163-185 | Nemeth, A.; Hannesschläger, G.; Leiss-Holzinger, E.; Wiesauer, K. & Leitner, M. Kawasaki, M. (Ed.) | Optical coherence tomography – Applications in non-destructive testing and evaluation | Mar.2013 |
Sonderausgabe im Journal „Infrared, Millimeter and Terahertz Waves“ | Wiesauer, K. & Jördens, C | Recent advantages in birefringence studies at THz frequencies | May.2013 |
International Journal of Thermophysics, 2013,34,1617-1632 | Burgholzer, P. & Hendorfer, G. | Limits of spatial resolution for thermography and other non-destructive imaging methods based on diffusion waves | Sep.2013 |
Applied Physics B, 2014, 114, 509-515 | Zamiri, S.; Reitinger, B.; Portenkirchner, E.; Berer, T.; Font-Sanchis, E.; Burgholzer, P.; Sariciftci, N. S.; Bauer, S. & Fernandez-Lazaro, F. | Laser Ultrasonic Receivers Based on Organic Photorefractive Polymer Composites | Mar. 2014 |
Applied Optics, 05/2014; 53(15):3183-3190. DOI: 10.1364/AO.53.003183 | Pfleger M.; Roitner H.; Pühringer H.; Wiesauer K.; Grün H.; Katletz S. | Advanced birefringence measurements in standard terahertz time-domain spectroscopy | Jun.2014 |
Chemical Engineering Science | Markl, Zettl, Hannesschläger, Sacher, Leitner, Buchsbaum, Khinast | Calibration-free In-Line Monitoring of Pellet Coating Processes via Optical Coherence Tomography | Jun.2014 |
European Journal of Pharmaceutics and Biopharmaceutics | Toschkoff, Schinwald, Markl, Scheideler, Leitner, Reiter, Schlingmann, Khinast | Effect of Tablet Coating Parameters: Combining Non-Destructive and Destructive Measurements | submitted |
IEEE Transactions on Visualization and Computer Graphics, Vol.16, No.5 | M.Malik, C.Heinzl, E.Gröller | Comparative Visualization for Parameter Studies of Dataset Series | Sep.2010 |
IEEE Transactions on Visualization and Computer Graphics, Vol.16, No.6 | A.Amirkhanov, C.Heinzl, M.Reiter, E.Gröller | Visual Optimality and Stability Analysis of 3DCT Scan Positions | Oct. 2010 |
NDT&E International 43, Issue 7, pp.599-605 | J.Kastner, B.Harrer, G.Requena, O.Brunke | A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys | Jun.2010 |
Materials characterization, Vol.62, No.1, 2011, pp.99-107 | J.Kastner, B.Harrer, H.-P.Degischer | High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys | Jan. 2011 |
Journal of Morphology, Vol. 272, No. 272, 2011 |
E.Heiss, N.Natchev, T.Schwaha, D.Salaberger, P.Lemell, C.Beisser, J.Weisgram | Oropharyngeal Morphology in the Basal Tortoise Manouria emys emys With Comments on Form and Function of the Testudinid Tongue | May. 2011 |
NDT&E International 44, Vol.44, Issue 7, pp.537-543 | G.Mayr, B.Plank, J.Sekelja, G.Hendorfer | Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers | Jun.2011 |
International polymer processing, Vol. 26, No. 3, 2011, pp. 283-291 | D.Salaberger, K.A.Kannappan, J.Kastner, J.Reussner and T.Auinger | CT Data evaluation of fibre reinforced polymers to determine fibre length distribution | Jul.2011 |
Powder Metallurgy Progress, Vol.11, No.1-2, 2011 | C.Gierl, B.Наrrеr, H.Dаnningеr, J.Kastner, R.Schneider | X-Ray Computed Tomography for Quantification of Secondary Pore Structures in PM Steels | Oct. 2011 |
Journal of cellular plastics, Vol.47, No.1, 2011, pp.567-578 | J.Kastner, R.Kickinger, D.Salaberger | High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam | Nov.2011 |
IEEE Transactions on Visualization and Computer Graphics, Vol.17, No.12, 2011, pp.2193-2202 | A.Amirkhanov, C.Heinzl, M.Reiter, J.Kastner, E.M.Gröller | Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography | Nov.2011 |
Materials characterization 64, 79-87 (2012) | J.Kastner, B.Plank, G.Requena | Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography | Feb.2012 |
Computer Graphics Forum, Vol. 31, No. 3, June 2012, pp. 1185-1194 | A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl | Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers | Jun.2012 |
WSCG 2012 - Journal of 20th International Conference on Computer Graphics, Visualization and Computer Vision 2012, pp.8 | H.Qureshi, M.Malik, M.A.Ahmad, C.Heinzl | Benchmarking of Denoising Techniques for Streaking Artifacts 3D XCT Scan Data | Jun.2012 |
Optical Fiber Technology, http://dx.doi.org/10.1016/j.yofte.2012.07.011 | B. Heise; St. Schausberger; S. Häuser; B. Plank; D. Salaberger; E. Leiss-Holzinger; D. Stifter | Full-Field Optical Coherence Microscopy with a Sub-nanosecond Supercontinuum Light Source for Material Research | Aug.2012 |
HOLZFORSCHUNG, Vol. 67, No. 2, 2012, pp. 201-205 | A. Taylor, B. Plank, G. Standfest, A. Petutschnigg | Beech wood shrinkage observed at the micro-scale by time-series of X-ray computed tomography tomographs (µXCT) | Sep.2012 |
NDT&E International 99, 1-25 (2012) | C.Heinzl, J.Kastner, A.Amirkhamov, E.Gröller, C.Gusenbauer | Optimal specimen placement in cone beam X-ray computed tomography | Sep.2012 |
BioResources, Vol. 8, No. 1, 2013, pp. 818-832 | S.Wieland, T.Grünewald, S.Ostrowski, B.Plank, G.Standfest, B.Mies, A.Petutschnigg | Assessment of Mechanical Properties of Wood-Leather Panels and the Differences in the Panel Structure by Means of X-ray Computed Tomography | Feb.2013 |
Polymer Testing | T.Köpplmayr , I.Milosavljevic , M.Aigner , R.Hasslacher , B.Plank , D.Salaberger J.Miethlinger | Influence of fiber orientation and length distribution on the rheological characterization of glass-fiber-filled | Mar.2013 |
NDT&E International 58, 64–71 (2013) | V.Revol, B.Plank, R.Kaufmann, J.Kastner, C.Kottler, A.Neels | Laminate fibre structure characterisation of carbon fibre-reinforced polymers by X-ray scatter dark field imaging with a grating interferometer | May.2013 |
IEEE Transactions on Visualization and Computer Graphics, doi: 10.1109/TVCG.2013.177 | A, Reh, C.Gusenbauer, J.Kastner, E.Gröller, C.Heinzl | MObjects - A Novel Method for the Visualization and Interactive Exploration of Defects in Industrial XCT Data | Dec.2013 |
Steel Research International 82 (2011) No.6 | C.Poletti, J.Six, M.Hochegger, S.Ilie, H.P.Degischer | Hot deformation behaviour of low alloyed steel | Apr.2011 |
Steel Research International, Vol 83(5), 445-455, 2012 | S.Großeiber, S.Ilie, C.Poletti, B.Harrer, H.P.Degischer | Influence of strain rate on hot ductility of a V-microalloyed steel slab | May.2012 |
Journal of Macromolecular Symposia 2012, 315, 115–124 | T.Koch, D.Salaberger, A.Zankel, H.Reingruber, A.Steiger-Thirsfeld,Y.Voronko S.Seidler |
Methods for Characterizing the 3-D Morphology of Polymer Composites | Jul.2012 |
Annual Review of Materials Research 42 (2012) 145-161. DOI: 10.1146/annurev-matsci-070511-155109 | G.Requena, H. P.Degischer | Three-Dimensional Architecture of Engineering Multiphase Metals | Aug.2012 |
Analytical and Bioanalytical Chemistry (2012) Doi: 10.1007/s00216-012-5818-9 | Y.Liu, F.Meirer, J.Wang, G.Requena, P.Williams, J.Nelson, A.Mehta, J.C.Andrews, P.Pianetta | 3D Elemental sensitive imaging using Transmission X-ray Microscopy | Sep.2012 |
Composites Part A (2012) | G.Requena, D.Canelo Yubero, J.Corrochano, J.Repper, G.Garcés | Stress relaxation during thermal cycling of particle reinforced aluminium matrix composites | Nov.2012 |
International Foundry Research | J.Crespo, D.Tolnai, G.Requena, H.P.Degischer, K.Track | Three-dimensional characterisation of micropores and graphite nodules in ductile cast iron | Sep.2013 |
Materials Science and Engineering A, Vol. 589, 2014, pp.242-251 | G.Requena, E.Maire, C.Leguen, S.Thuillier | Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomography | Okt.2013 |
Materials Science and Engineering A | Z.Asghar, G.Requena | Three dimensional post mortem study of damage after compression of cast Al-Si alloys | Okt.2013 |
Materials Characterization, Vol. 88, 2014, pp.80-85 | Z.Asghar, G.Requena, G.H.Zahid, Rafi-ud-Din | Effect of thermally stable Cu-and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloy | Dez.2013 |
Practical Metallgraphy / Praktische Metallographie, Vol. 51, No. 6, pp.451-462 | R.Fernández-Gutiérrez, G.Requena, B.Stauder | 3D-Characterization of AlCu5Mg0.3Mn0.3 and AlCu7Mn0.4 Alloys | Jun.2014 |
Composites Part A | M Schöbel, G Requena, G Fiedler, D Tolnai, S Vaucher, HP Degischer | Void formation in metal matrix composites by solidification and shrinkage of an AlSi7 matrix between densely packed particles | Jul.2014 |
Konferenzbeiträge
Konferenz | Autoren | Titel | Datum |
Fachtagung Industrielle Computertomografie, Wels | M.Wurm, C.Hofer, H.Traxler, A.Zabernig, B.Harrer | Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenz Tomographie | 27-29.09.2010 |
Food Packaging Innovations, Graz | M.Leitner, G.Hanneschläger, E.Breuer, E.Gross, K.Wiesauer | Optical coherence tomography as a non destructive tool for quality control in food packaging | 05-06.10.2010 |
ISPDI 2011 - 4rd International Symposium on Photoelectronic Detection and Imaging, Beijing, China | M.Pfleger, S.Katletz, N.Vieweg, B.Scherger, M.Scheller, M.Mikulics, M.Koch, K.Wiesauer | Comparison of polarization-sensitive detection methods of THz-radiation | 24-26.05.2011 |
6th NDT in Progress, Prague, Czech Republic | G.Hannesschläger, A.Nemeth, C.Hofer, C.Goetzloff, J.Reussner, K.Wiesauer, M.Leitner | Optical coherence tomography as a tool for non destructive quality control of multi-layered foils | 10-12.10.2011 |
Photorefractive Materials, Effects, and Devices: Light in Nonlinear Structured Materials 2011 (PR11), Ensenada, Mexico | S.Zamiri, B.Reitinger, T.Berer, S.Bauer, P.Burgholzer, V.M.Herrera, M.Rodriguez, G.Ramos-Ortiz, J.-L.Maldonado | A comparison on sensitivity of laser ultrasonic receivers based on photorefractive materials | 13-15.10.2011 |
International THz Conference, Villach, Austria | M.Pfleger, S.Katletz, H.Pühringer, N.Vieweg, B.Scherger, B.Heinen, M.Scheller, M.Mikulics, M.Koch, K.Wiesauer | Comparison of polarization-sensitive detection methods of THz radiation | 24-25.11.2011 |
IRMMW-THz - International Conference on Infrared, Millimeter and Terahertz Waves, Wollongong, Australia | S. Katletz, M. Pfleger, H. Pühringer, M. Mikulics, N. Vieweg, O. Peters, B. Scherger, M. Scheller, M. Koch, and K. Wiesauer | PS-THz imaging: analysis of orientation and birefringence | 23-28.09.2012 |
IEEE International Ultrasonics Symposium 2012, Dresden, Germany | Berer, T.; Hochreiner, A.; Roitner, H. & Burgholzer, P | Reconstruction algorithms for remote photoacoustic imaging | 07-10.10.2012 |
IEEE International Ultrasonics Symposium 2012, Dresden, Germany | Grünsteidl, C.; Roither, J.; Veres, I. A.; Reitinger, B.; Berer, T.; Grün, H.; Burgholzer, P.; Köstenbauer; Winkler & Traxler | Characterization of thin layers using a frequency domain laser-ultrasonic system | 07-10.10.2012 |
OCT4NDT - Symposium on Optical Coherence Tomography for Non-destructive Testing, Linz, Austria | D.Markl, G.Hannesschläger, M.Leitner, S.Sacher, J.G.Khinast | Optical Coherence Tomography for non-destructive tablet coating characterization”, OCT4NDT, 14.02.2013, Linz, Austria | 13-14.02.2013 |
IEEE International Ultrasonics Symposium 2013, Prag, Czech Republic | S.Zamiri, B.Reitinger, H.Grün J.Roither, S.Bauer, P.Burgholzer |
Laser Ultrasonic Velocity Measurement for Phase Transformation Investigation in Titanium Alloy |
21.-25.07.2013 |
International THz Conference, Villach, Austria | M.Pfleger | Advanced determination of birefringence and optical axis with a standard THz time-domain system” | 09-10.09.2013 |
38th International Conference on Infrared Millimeter and Terahertz Waves, Mainz, Germany | M. Pfleger, S. Katletz, H. Pühringer, and K. Wiesauer | Advanced determination of birefringence and optical axis with a standard THz time-domain system | 01-06.09.2013 |
IRMMW-THz2014 - 39th International Conference on Infrared, Millimeter, and Terahertz Waves, Tucson | M. Pfleger; H. Pühringer; S. Katletz | Terahertz-Elasticity Measurements on Elastomers | 14-19.09.2014 (accepted) |
11th European Conference on Non-Destructive Testing, Prague | M. Pfleger; H. Pühringer; S. Katletz | Strain-Dependent Birefringence of elastic polymers | 6-10.10.2014 (accepted) |
FFH 2010 - 4. FH-Forschungsforum, Pinkafeld | B.Plank, J.Kastner, J.Sekelja, D.Salaberger | Porositätsbestimmung in kohlefaserverstärkten Kunststoffen mittels Röntgen-Computertomografie | 07-08.04.2010 |
FFH 2010 - 4. FH-Forschungsforum, Pinkafeld | G.Zauner, G.Hendorfer | Bildgebende Methode zur Bestimmung der optischen Konstanten von dünnen Schichten bei hohen Temperaturen durch Analyse der thermischen Strahlungsemission | 07-08.04.2010 |
DGfZP-Tagung 2010, Erfurt | C.Heinzl, M.Reiter, M.Allerstorfer, E. Gröller, J.Kastner | Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen | 10-12.05.2010 |
10th ECNDT, Moscow, Russia | B.Harrer, H.P.Degischer, J.Kastner | Microfocus computed x-ray tomography of segregations in high strength aluminium alloys | 07-11.06.2010 |
10th ECNDT, Moscow, Russia | J.Kastner, B.Harrer, V.Carl, H.Traxler | Computed tomography and pulsed thermography of carbon reinforced carbon/copper components for thermo-nuclear fusion | 07-11.06.2010 |
10th ECNDT, Moscow, Russia | J.Kastner, R.Kickinger, D.Salaberger | Structural Analysis of polymeric foams by sub-µm X-ray compted tomography | 07-11.06.2010 |
10th ECNDT, Moscow, Russia | M.Allerstorfer, C.Heinzl, J.Kastner, E.Gröller | Uncertainty Visualization of Computed Tomography Datasets from Complex Components Using Statistical Analysis | 07-11.06.2010 |
10th ECNDT, Moscow, Russia | M.Reiter, C.Heinzl, D.Salaberger, D.Weiss, J.Kastner | Study on Parameter Variation of an Industrial Computed Tomography Simulation Tool Concerning Dimensional Measurement Deviations | 07-11.06.2010 |
PPS (Polymer Processing Society) 26th Annual Meeting, Banff, Canada | D.Salaberger, K.A.Kannappan, J.Kastner, J.Reussner, T.Auinger | CT data evaluation of fibre reinforced polymers to determine fibre length distribution | 04-08.07.2010 |
QIRT, Quebec | G.Zauner, F.Mayrhofer, G.Hendorfer | Optical Characterization of growing thin films at high temperatures by analysis of near infrared emissivity variations using CCD thermal imaging | 27-30.07.2010 |
CT-Tagung 2010, Wels | D.Salaberger, K.A.Kannappan, J.Kastner | Method for the 3D characterisation of fibres in reinforced polymers | 27-29.09.2010 |
CT-Tagung 2010, Wels | B.Plank, J.Sekelja, G.Mayr, J.Kastner | Porositätsbestimmung in der Flugzeugindustrie mittels Röntgen-Computertomografie | 27-29.09.2010 |
CT-Tagung 2010, Wels | M.Reiter, C.Heinzl, D.Salaberger, D.Weiss, C.Kuhn, J.Kastner | Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie | 27-29.09.2010 |
21st IEEE Visualization Conference, Salt Lake City, Utah, USA | A.Amirkhanov, C.Heinzl, M.Reiter, E.Gröller | Visual Optimality and Stability Analysis of 3DCT Scan Positions | 24-29.10.2010 |
NDT in Aerospace, Hamburg, Germany | B.Plank, D.Salaberger, J.Kastner | High Resolution X-ray CT for Polymer Materials Science | 22.-24.11.2010 |
NDT in Aerospace, Hamburg, Germany | G.Zauner, G.Mayr, G.Hendorfer | Subsurface Defect Characterization in Pulsed Thermography by Means of Wavelet Analysis | 22-24.11.2010 |
NDT in Aerospace, Hamburg, Germany | J.Kastner, B.Plank, D.Salaberger, J.Sekelja | Defect and Porosity Determination of Fibre Reinforced Polymers by X-ray Computed Tomography | 22-24.11.2010 |
FFH 2011 - 5. FH-Forschungsforum, Wien | B.Plank, B.Harrer, D.Salaberger, J.Kastner | Zerstörungsfreie Charakterisierung von heterogenen Werkstoffen bis in den sub-μm-Bereich mittels Kegelstrahl-Röntgen-Computertomografie, | 27-28.04.2011 |
FFH 2011 - 5. FH-Forschungsforum, Wien | J.Gruber, G.Mayr, G.Hendorfer, J.Sekelja, B.Plank | Digitale Shearografie & Aktive Thermografie - Neue Methoden der zerstörungsfreien Prüfung in der Luftfahrtindustrie, | 27-28.04.2011 |
13th PFMC Workshop and 1st FEMaS Conference, Rosenheim, Germany | T.Huber, H.Traxler, B.Harrer, R.Kickinger, B. Riccardi | Computed tomography inspection of the CFC monoblock section of ITER Inner Vertical Target prototypes after production, after high heat flux testing and after critical heat flux testing | 09-13.05.2011 |
DIR - Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Germany (Paper, Poster) | C.Heinzl, A.Amirkhanov, M.Reiter, J.Kastner, E.Göller | Fast estimation of optimal specimen placements in 3D X-ray computed tomography | 20-22.06.2011 |
DIR - Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Germany | J.Kastner, B.Plank, D.Salaberger | Phase contrast imaging with high resolution cone beam X-ray computed tomography | 20-22.06.2011 |
DIR - Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Germany (Paper, Poster) | M.Reiter, B.Harrer, D.Salaberger, C.Heinzl, C.Kuhn, J.Kastner | Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation | 20-22.06.2011 |
POLYCHAR 2012 - World Forum on Advanced Materials, Dubrovnik, Croatia | D.Salaberger, T.Koch, Y.Voronko, S.Seidler, J.Kastner | Comparison of particle size distribution derived from 2D and 3D analysis for particle filled polymers | 26-30.03.2012 |
FFH 2012 - 6. FH-Forschungsforum, Graz , Austria | J.Kastner, B.Plank, D.Salaberger, K.Kannappan | Quantitative Evaluierung von Röntgen-CT-Daten von glasfaserverstärkten Kunststoffen zur Bestimmung von Faserlängenverteilung und -orientierung | 11-12.04.2012 |
WCNDT 2012 - 12th World Conference on Non-Destructive Testing, Durban, South Africa | J.Kastner, B.Harrer, G.Requena | Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography | 12-15.04.2012 |
WCNDT 2012 - 12th World Conference on Non-Destructive Testing, Durban, South Africa | J.Kastner, B.Plank, C.Kottler, V.Revol | Comparison of phase contrast X-ray computed tomography methods for non-destructive testing of materials | 12-15.04.2012 |
WCNDT 2012 - 12th World Conference on Non-Destructive Testing, Durban, South Africa | J.Kastner, D.Salaberger, B.Plank | High resolution X-ray computed tomography of fibre and particle filled polymers | 12-15.04.2012 |
ECCM 2012 - 15th European Conference on Compoite Materials, Venice, Italy | M.Jerabek, S.Gastl, M.Reiter, B.Plank, D.Salaberger, H.Herbst, Z.Major | Characterization of short fiber reinforced Polypropylene Composites | 24-28.06.2012 |
DACH-Tagung , Graz, Austria | D.Salaberger, H. Scharleitner, J.Kastner | 3D Analyse der Tinteausbreitung in Polymerschäumen mit Hilfe der Röntgen-Mikro Computertomografie | 17-19.09.2012 |
DACH-Tagung , Graz, Austria | J.Kastner, D.Salaberger, B.Plank | Hochauflösende Röntgencomputertomografie von faser- und partikelverstärkten Kunststoffen | 17-19.09.2012 |
iCT2012 - Conference on Industrial Computed Tomography, Wels, Austria | M.Jerabek, M.Reiter, H.Herbst; B.Plank, D.Salaberger, Z.Major | Characterization of Short Fiber Reinforced Polypropylene Composites | 19-21.09.2012 |
iCT2012 - Conference on Industrial Computed Tomography, Wels, Austria | M.Reiter, M.Krumm, S.Kasperl, C.Kuhn, M.Erler, D.Weiß, C.Heinzl, C.Gusenbauer, J.Kastner | Evaluation of transmission based image quality optimisation for X-ray computed tomography | 19-21.09.2012 |
iCT2012 - Conference on Industrial Computed Tomography, Wels, Austria | A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller | Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components | 19-21.09.2012 |
iCT2012 - Conference on Industrial Computed Tomography, Wels, Austria | J. Charwat-Pessler, E. Wernersoon, B. Plank, M. Musso, K. Entacher, P. Schuller-Götzburg, G. Standfest, B. Mies, A. Petutschnigg | 3D Analysis of heterogenous and biogenic structures based on bone augmentation material | 19-21.09.2012 |
7. Ranshofener Leichtmetalltage, Gmunden, Austria | J.Kastner, B.Plank, C.Gusenbauer, G.Requena | 3D-Mikrogefügeuntersuchungen an Leichtmetalllegierungen mittels hochauflösender Röntgen-Computertomografie |
07-08.11.2012 |
NDT in Aerospace, Augsburg, Germany | J.Kastner, C.Heinzl, A.Reh, B.Plank, D.Salaberger | Advanced X-ray tomographic methods for quantitative characterisation of carbon fibre reinforced polymers | 13-15.11.2012 |
ASNT - 22nd Annual Research Symposium, Memphis, United States of America | J.Kastner, B.Plank, D.Salaberger | High resolution X-ray computed tomography for quantitative characterization of fiber reinforced polymers and heterogeneous light metals | 18-21.03.2013 |
FFH 2013 - 7. FH-Forschungsforum, Dornbirn, Austria | B.Plank, C.Gusenbauer, D.Salaberger, J.Kastner | Computed tomography links together: A wide range of applications enables interdisciplinary collaborations with research, industry and business | 03-04.04.2013 |
SCCG 2013 - Spring Conference on Computer Graphics, Smolenice Castle, Slovakia | A.Amirkhanov, C. Heinzl, C. Kuhn, J. Kastner, E. Gröller | Fuzzy CT Metrology: Dimensional Measurements on Uncertain Data | 01.05.2013 |
DGZfP Annual Conference, Dresden, Germany | B.Plank, F.Ellert, J.Gruber, C.Gusenbauer, J.Kastner | Detection of defects in carbon fiber reinforced polymers by means of visual inspection, ultrasonic testing, digital radiography, active thermography and X-ray computed tomography | 06-08.05.2013 |
ICTMS 2013 - 1st International Conference on Tomography of Materials and Structures, Ghent, Belgium | A.Reh, B.Plank, J.Kastner, E.Gröller, C.Heinzl. | Advanced Visualization Methods for Porosity in Carbon Fiber Reinforced Polymers | 01-05.07.2013 |
ICTMS 2013 - 1st International Conference on Tomography of Materials and Structures, Ghent, Belgium | D.Salaberger, J.Kastner, W.Li | Characterization of bent cellulose fibres using Micro-CT analysis | 01-05.07.2013 |
ICSAAM 2013 - The 5th International Conference on Structural Analysis of Advanced Materials, Island of Kos, Greece | D.Salaberger, S.Gleiß, J.Kastner | Comparison of methods to determine fibre length distribution: X-ray CT versus standard method | 23 -26.09.2013 |
Composites Week @ Leuven and Texcomp-11 Conference | C.Hahn, E.Winterstein, I.Straumit, B.Plank, R.Hinterhölzl, S.Lomov, C.Binetruy | A Simulation Approach of Permeability Determination Using Computed Tomotgraphy Scans | 16-20.09.2013 |
11th ECNDT - European Conference for Non-destructive Testing, Prague, Czech Republic | C.Gusenbauer, M.Reiter, J.Kastner, G.Kloesch, | Detection of non-metallic inclusions in steel by X-ray computed tomography and after fatigue testing | 6-10.10.2014 |
11th ECNDT - European Conference for Non-destructive Testing, Prague, Czech Republic | C.Kuhn, M.Reiter, S.Schröpfer, S.Kasperl, D.Weiss, M.Erler | Automatic determination of optimal CT measuring parameters for an unknown part | 6-10.10.2014 |
iCT2014 - 4th Conference on Industrial Computed Tomography, Wels, Austria | M. Reiter, S. Kasperl, C. Kuhn, M. Erler, D. Weiß, C. Gusenbauer, J. Kastner | Evaluation of a histogram based image quality measure for X-ray computed tomography | 25-28.02.2014 |
iCT2014 - 4th Conference on Industrial Computed Tomography, Wels, Austria | A. Amirkhanov, M. Reiter, J. Kastner, E. Gröller, C. Heinzl | Uncertainty in CT Metrology: Visualizations for Exploration and Analysis of Geometric Tolerances | 25-28.02.2014 |
iCT2014 - 4th Conference on Industrial Computed Tomography, Wels, Austria | V.Revol, B.Plank, C.Kottler, J.Kastner, R.Kaufmann, A.Dommann, A.Neels | Laminate fibre structure characterisation by orientation-selective X-ray grating interferometry | 25-28.02.2014 |
iCT2014 - 4th Conference on Industrial Computed Tomography, Wels, Austria | W.Schuetzenhoefer, A.Tazreiter, B.Plank, P.Schumacher | Determination of cleanliness different special steels comparison of different methods | 25-28.02.2014 |
iCT2014 - 4th Conference on Industrial Computed Tomography, Wels, Austria | J.Charwat-Pessler, B.Plank, G.Kain, S.Wieland, T.Grünewald, G.Standfest, A.Petutschnigg | Application of X – ray microcomputed tomography on wood and wood based composites | 25-28.02.2014 |
ECCM16 - 16th European Conference on Composite Materials, Sevilla, Spain | D. Salaberger, M.Arikan, T. Paier, T., J. Kastner | Characterization of damage mechanisms in glass fibre reinforced polymers using x-ray computed tomography | 22-26.06.2014 |
ECCM16 - 16th European Conference on Composite Materials, Sevilla, Spain | M. Jerabek, S. Gastl, G.Gsellmann, M.Reiter, A.Hartl, D.Salaberger, Z.Major | Prediction of fibre orientation in short glass fibre polypropylene composites and the consequences for micromechanical simulations | 22-26.06.2014 |
3rd Scientia Materiarum Symposium, San Sebastian, Spain | J.Crespo | In-situ Tensile Test of Nodular Cast-Iron GJS700 at ID15 (ERSF) | 21-23.10.2009 |
56. Metallkunde-Kolloquium, Lech am Arlberg, Austria | J.Crespo | 3D graphite distribution in GJS700 and crack paths druing straining | 12-14.04.2010 |
Hetmat Meeting, Grenoble, France | J.Crespo, C.Landron, E.Maire, K.Track, B.Harrer, H.P. Degischer | Crack paths in ductile cast iron reconstructed from in-situ tomographies” at | 15-16.07.2010 |
ASPM 2010 - 10th Austrian Polymer Meeting and 2nd Austrian-Slowenian Polymer Meeting, Leoben | T.Koch, D.Salaberger, S.Seidler | Morphology characterization of particle filled polymers by tomographic methods | 08-10.09.2010 |
P.2010 - 14th Intern. Conference Polymeric Materials, Proc. p.12, Halle, Germany | T.Koch, D.Salaberger, S.Seidler | Morphology characterization of particle filled polymers by tomographic methods | 15-17.09.2010 |
Computertomografie Tagung, Wels, Austria | J.Crespo-Casanova, H.P.Degischer, C.Ladron, E.Maire, K.Track, B.Harrer | In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl | 27-29.09.2010 |
Computertomografie Tagung, Wels, Austria | M. Hochegger, B.Harrer, Sergiu Ilie, H.P. Degischer | Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röngten-Computertomografie | 27-29.09.2010 |
Computertomografie Tagung, Wels, Austria (Poster) | D.Tolnai, G.Requenaa, P.Cloetensc, J.Lendvaib, H.P.Degischera | Sub‐micrometer holotomographic characterization of coarsening of rigid phases in AlMg7.3Si3.5(Fe, Mn) | 27-29.09.2010 |
Computertomografie Tagung, Wels, Austria (Poster) | G.Requena | Sub‐micrometer holotomography of multiphase metals | 27-29.09.2010 |
Computertomografie Tagung, Wels, Austria (Poster) | M.Rodríguez‐Hortalá, D.Salaberger, S.Hernández, H.P.Degischer | Mechanical and structural characterisation of defects in CFRP materials | 27-29.09.2010 |
Computertomografie Tagung, Wels, Austria (Poster) | M.Schöbel | Residual stresses and void kinetics in particle reinforced metal matrix composites during thermal cycling | 27-29.09.2010 |
Tagung Werkstoffprüfung, Neu-Ulm, Germany | J.Crespo, H.P.Degischer, C.Landron, E.Maire, B.Harrer, K.Track | Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl | 02-03.12.2010 |
POLYCHAR 19, Kathmandu, Nepal | T.Koch, D.Salaberger, S.Seidler | Methods for characterizing the 3d morphology of polymer composites | 20-24.03.2011 |
DGM - 18.Symposium: Verbundwerkstoffe und Werkstoffverbunde, Chemnitz, Germany | M.Rodríguez-Hortalá, D.Salaberger, S.Hernández, M.Holzmeier, H.-P.Degischer, J.Kastner | Characterisation of defects in carbon fibre reinforced polymers (CFRP) | 30.03.-01.04.2011 |
Thermec Conference, Quebec, Canada | C.Poletti, S.Großeiber, S.Ilie, H.P.Degischer | Hot deformation behaviour of V micro-alloyed steel | 01-05.08.2011 |
6th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Diffraction, Hamburg, Germany | G.Requena, D.Canelo Yubero, G.Garcés, C.Poletti, G.Fiedler | In situ diffraction during deformation and synchrotron tomography of light alloys (Invited Talk) | 07-09.09.2011 |
HI TEMP 2012 Conference, Hamburg | P.Barriobero-Vila, F.Warchomicka, M.Stockinger, T.Buslaps, G.Requena | Phase transformation kinetics in a near-b titanium alloy | 12.09.2012 |
Metallographie-Tagung, Karlsruhe, Germany | J.Crespo, H.P.Degischer, C.Landron, E.Maire, B.Harrer, K.Track | Rissfortschritt in Sphäroguss mit unterschiedlicher Graphiteverteilung bei in-situ Zugversuche im Synchrotron-Strahl | 14-16.09..2011 |
Metallographie-Tagung, Karlsruhe, Germany | M.Jaliliziyaeian, G.Requena, H.P.Degischer | 3D study of metallic microstructures by means of ion milling tomography | 14-16.09..2011 |
3D Microstructure Meeting, Saarbrücken, Germany | M.Rodríguez-Hortalá, G.Requena, F.Sket | In-situ synchrotron microtomography during tensile deformation of a multidirectional carbon fibre reinforced epoxy laminate | 02-04.11.2011 |
P.2012 - Polymeric Materials 2012, Halle, Germany | T.Koch, D.Salaberger, M.Palmstingl, M.Schoßig | Deformation of short fibre reinforced polymers: Correlation between results obtained by acoustic emission and tomography | 12-14.09.2012 |
iCT2012 - 3rd Conference on Industrial Computed Tomography, Wels, Austria | S. Großeiber, G. Requena, E. Kozeschnik, C. Gusenbauer, S. Ilie | Correlation between hot ductility and damage in microalloyed steel slabs | 19-21.09.2012 |
Windmannstättentagung 2012, Linz, Austria | G.Requena | Linking properties and 3D architecture in multiphase engineering materials | 06- 08.11.2012 |
7th Seminar for Central European PhD Students, Research material Science, Trnava, Slovakia | P.Barriobero-Vila, F.Warchomicka, M.Stockinger, N.Schell, A.Stark, T.Buslaps, G.Requena | Phase transformation kinetics in a near-b titanium alloy | 15.11.2012 |
Satellite Meeting to the DESY Photon Science Users’ Meeting 2013 - „The German Engineering Materials Science Centre (GEMS)", Hamburg, Germany | P.Barriobero-Vila, F.Warchomicka, M.Stockinger, N.Schell, A.Stark, T.Buslaps, G.Requena | Decomposition of the α‘‘/β duplex-phase microstructure during continuous heating of a near-β Ti-alloy | 24.01.2013 |
MEFORM 2013 - Simulation von Umformprozessen, Altenberg, Germany | S.Großeiber, M.Rath, E.Kozeschnik | Modeling of the interaction between precipitate formation and forming – A thermo-kinetic approach | 20-22.03.2013 |
ASPM 2010 - Austrian-Slowenian Polymer Meeting, Bled, Slovenia | T. Koch, D. Salaberger, M. Palmstingl, M. Schoßig | Deformation of short fibre reinforced polypropylene: Correlation between acoustic emission and X-ray computed tomography | 03-05.04.2013 |
Aluminium 2000, Italy | R.Fernández Gutiérrez, G.Requena, B.Stauder, E.Maire, A. Isaac, E.Boller, M.Scheel, I.Manke | 3D-Characterization of AlCu4.5Mg0.3 and AlCu7 Alloys | 01-05.07.2013 |
ICTMS 2013 - 1st International Conference on Tomography of Materials and Structures, Ghent, Belgium | R.Fernández Gutiérrez, G.Requena, B.Stauder, E.Maire, A.Isaac, E.Boller, M.Scheel, I.Manke | 3D-Characterization of AlCu4.5Mg0.3 and AlCu7 Alloys | 01-05.07.2013 |
Highlight Lecture: LightMAT 2013, Bremen | P.Barriobero-Vila, F.Warchomicka, M.Stockinger, N.Schell, A.Stark, T.Buslaps, G.Requena | Decomposition of the alpha"/Beta duplex-phase microstructure during continuous heating of a near-beta Ti-alloy | 01.09.2013 |
Euromat 2013 | R.Fernández-Gutiérrez, G.Requena, B.Stauder, E.Maire, A.Isaac, E.Boller, M.Scheel, I.Manke | 3D-Characterization of AlCu4.5Mg0.3 and AlCu7 alloys after solution heat treatment and during in situ tensile tests | 8-13.09.2013 |
THERMEC 2013 - Advanced Materials Research, Las Vegas, USA | S.Großeiber, C.Gusenbauer, S.Ilie, G.Requena, E.Kozeschnik | Relevance of Hot Ductility Tests to Crack Sensitivity during Continuous Casting of Steel | 02-06.12.2013 |
8th Seminar for Central European PhD Students, Research material Science, Budapest, Hungary | R.Koos, G.Requena | Influence of 3D Microstructure on thermo-mechanical fatigue in piston alloys | 13-14.01.2014 |
8th Seminar for Central European PhD Students, Research material Science, Budapest, Hungary | D.Canelo-Yubero, G.Requena, C.Poletti, F.Warchomicka | Load partition and microstructural evolution during hot tensile tests in Ti-based alloys | 13-14.01.2014 |
iCT2014 - 4th Conference on Indistrial Computed Tomography, Wels, Austria | R.Fernández-Gutiérrez, G.Requena, B.Stauder | 3D- Characterization of AlCu5Mg0.3Mn0.3 and AlCu7Mn0.4 alloys | 25-28.02.2014 |
iCT2014 - 4th Conference on Indistrial Computed Tomography, Wels, Austria | S.Großeiber, C.Gusenbauer, S.Ilie, E.Kozeschnik, G.Requena | Damage initiation during hot deformation of a continuously cast stee | 25-28.02.2014 |
DGZfP-Jahrestagung 2011, Bremen, Germany | S. Kasperl, S.Reisinger, M.Franz | Aufnahmeplanung in der industriellen Computertomographie | 30.05-01.06.2011 |
International Symposium on Digital Industrial Radiology and CT 2011, Berlin, Germany | S.Reisinger, S.Kasperl, M.Franz, J.Hiller, (Technical University of Denmark), U.Schmid (Otto-Friedrich University of Bamberg) | Simulation-based planning of optimal conditions for industrial computed tomography | 20-22.06.2011 |
ICTMS 2013 - 1st International Conference on Tomography of Materials and Structures, Ghent, Belgium | Stefan Kasperl, Matthias Franz, Michael Karl, Stefan Schröpfer | Fully automatic analysis of standard CT characteristics by means of simulation | 01-05.07.2013 |
11th ECNDT, Prague, Czech Republic | S.Kasperl, R.Schielen, F.Sukowski, P.Hornberger, A.Gruber | CT simulation study to demonstrate material impact using hole plates | 06-10.10.2014 |
11th ECNDT, Prague, Czech Republic | Richard Schielein, Stefan Schröpfer, Markus Kiunke, Simon Zabler, Stefan Kasperl | Quantitative evaluation of CT Images by means of Shannon Entropy | 06-10.10.2014 |
Dissertationen
Titel | Fertigstellung | Dissertant |
Photorefraktive Interferometer in der zerstörungsfreien Materialprüfung | Sep 2014 | Saeid Zamiri |
„contactless“ remote photoacoustic imaging | Dez 2013 | Armin Hochrainer |
Dedektierbarkeit von Heterogenitäten in Fe-Basis und Aluminiumlegierungen mittels Röntgen-Computertomographie | Jul 2009 | Bernhard Harrer |
Feature Centric Volume Visualization | Dez 2009 | Muhammad M. Malik |
Habilitationsschrift: X-ray computed tomography for the development of materials and components | Jan 12 | Johann Kastner |
Visualization and Analysis of Industrial CT-Data (working title) | Sep 2012 | Artem Amirkhanov |
Quantitative Charakterisierung von Leichtbauverbundwerkstoffen mittels 3D-Röntgencomputertomografie | Dez 2014 | Andreas Reh |
Innere Rissbildung in Stranggußbrammen im Bereich der g-a Umwandlungstemperaturen | Mär 2011 | Markus Hochegger |
Gefügeprogonose für Sphäroguss mittels Differential-Thermo-Analyse | Jul 2011 | Jose Crespo Casanova |
Residual stresses and thermal fatigue damage in metal matrix composites for heat sink applications | Jul 2011 | Michael Schöbel |
Architecture and thermomechanical behaviour of a cast AlCu alloys for cylinder heads | Sep 2014 | Ricardo Fernandez Gutierrez |
Load Partition and Microstructural Evolution at High Temperature in Multiphase Lightweight Metallic Materials | Apr 2014 | David Canelo Yubero |
Thermo-mechanical behaviour correlated with internal architecture and stability of networks in Al-Si based piston alloys | Sep 2014 | Robert Koos |